Industrial liquid crystal displays are liquid crystal displays used in industry, with a variety of display sizes and installation methods. Different from ordinary liquid crystal displays, it can adapt to extreme environments, run stably, and have a long service life.
The main difference between civilian and commercial monitors is that the shell design generally adopts an all-steel design, and the panels are divided into ordinary iron, stainless iron, aluminum panels, stainless steel, and other different materials, with special dust-proof and shock-proof designs.
- Human Machine Interface (HMI)
- Factory Automation, Measurement
- Diagnosis, Process Control, Field Service, Maintenance, Elevator Control System
- Smart Router, Industrial Router
- Outdoor industrial devices
- Charging devices
- Industrial Printer
- Measurement devices
Industrial displays are displays used in industrial control processes or equipment. The main difference between it and civilian or commercial monitors is that the shell design generally adopts an all-steel design, and the panel is divided into different materials such as ordinary iron plate, stainless iron, stainless steel, aluminum panel, etc. Liquid crystal display, in the case of high environmental requirements, consider using a wide temperature (-40 to 85 degrees) liquid crystal display.
Now, only a few large foreign manufacturers produce such displays, which are more expensive. The protection level of the industrial display is represented by IP**, the former is the dustproof level, and the latter is the waterproof level. The dustproof rating is up to 6 and the waterproof rating is up to 8.
G&L Electronics — Customized TFT LCD/OLED Touchscreen Supplier
Dream big, anything is possible now.
An Outdoor GPS is a global positioning system device designed specifically for use in outdoor activities such as hiking, camping, and mountaineering. It provides users with accurate and real-time positioning data, as well as a range of features like mapping, navigation, and route planning.
There are various LCD and OLED displays used for outdoor GPS devices. Some of the popular sizes include:
1. 2.2 inch TFT LCD Display
2. 2.8 inch TFT LCD Display
3. 3.5 inch TFT LCD Display
4. 4.3 inch TFT LCD Display
5. 5.0 inch TFT LCD Display
6. 0.96-inch OLED Display
7. 1.3-inch OLED Display
Since they are used for outdoor environments, transflective displays are commonly used, such as 2.4-inch and 3. inch transflective LCD screens.
The EV (electric vehicle) charger is an electronic device used to charge electric vehicles. The device usually has a display that shows the charging status, power level, and other relevant information. The displays used for EV chargers can range from small LCD screens to large OLED displays, depending on the manufacturer and specific model. Some popular displays used for EV chargers include:
– LCD displays: These are commonly used on smaller, lower-cost EV chargers. They typically range in size from around 2 to 5 inches and have a resolution of up to around 800×480 pixels.
– OLED displays: These are used on higher-end EV chargers and offer better contrast and color saturation than LCD displays. They can range in size from around 2 to 10 inches and have a resolution of up to around 1280×800 pixels.
Some examples of EV chargers with LCD or OLED displays include the JuiceBox Pro (4.3-inch LCD display), ChargePoint Home Flex (2.4-inch LCD display), and Tesla Wall Connector (7-inch OLED display).
An industrial router is a networking device used to connect different devices on an industrial network. It is designed to operate in harsh environments and withstand extreme temperatures, vibrations, and electrical noise.
The LCD/OLED displays used for industrial routers vary depending on the manufacturer and model. Some industrial routers may not have a display at all and are managed through a web interface or command-line interface (CLI). However, some higher-end models may feature an LCD or OLED display for easy management and monitoring of network status.
Some popular LCD display sizes used for industrial routers include 3.5 inches, 5 inches, and 7 inches. OLED displays, on the other hand, may range from 0.96 inches to 1.3 inches. The display size and type largely depend on the intended use of the industrial router and the manufacturer’s specifications.
Measurement devices are instruments used to gather data about physical properties such as temperature, pressure, flow rate, and more.
There are a variety of LCD and OLED displays used for measurement devices, with sizes ranging from small to large depending on the application. Some examples include:
– Small 0.91 inch OLED screens used in handheld temperature and humidity meters
– 1.8-inch TFT LCD displays used in multimeters and digital measurement tools
– 3.5-inch touchscreen displays used in oscilloscopes and power meters
– 7-inch LCD displays used in panel-mounted measurement instruments such as pressure gauges and flow meters.
Discover Our LCD
View the most recent TFT LCD&OLED Displays that can be used for IOT Applications.